JL AUDIO 10TW3-D4 žemų dažnių garsiakalbis - Žemų dažnių garsiakalbiai

JL AUDIO 10TW3-D4 žemų dažnių garsiakalbis

Siūlyk savo kainą

Jūsų pasiūlymas išsiųstas

Jūsų pasiūlymas priimtis, prašome patikrinti savo el. pašto dėžutę

  •     *Būtini laukeliai

Kraunama

Kaina:
309,00 €
Su mokesčiais Dėl pristatymo laiko teirautis

Žemo montavimo gylio automobilinis žemų dažnių garsiakalbis.

Kiekis
Pristatymas pagal užsakymą

  • Prekėms suteikiama gamintojo numatyta garantija Prekėms suteikiama gamintojo numatyta garantija
  • Nemokamas pristatymas visoje Lietuvoje nuo 50EUR Nemokamas pristatymas visoje Lietuvoje nuo 50EUR
  • 14 dienų prekių grąžinimo garantija 14 dienų prekių grąžinimo garantija

Table_Image
Continuous Power Handling (RMS) 400 W
Recommended Amplifier Power (RMS) 200 - 400 W
Nominal Impedance (Znom) Dual 4 Ω

Physical Specifications

Table_Image
Nominal Diameter 10 in / 250 mm
Overall Diameter (A) A1: 11.2 in / 284 mm
A2: 10.5 in / 267 mm
Mounting Hole Diameter (B) 9.625 in / 244 mm
Bolt Hole Circle Diameter (C) 10.5 in / 267 mm
Motor Outer Diameter (D) 5.1 in / 130 mm
Mounting Depth (E) 3.25 in / 83 mm
Driver Displacement 0.019 cu ft / 0.54 L
Net Weight 10.1 lb / 4.6 kg

Parameters

Free Air Resonance (Fs) 32.30 Hz
Electrical “Q” (Qes) 0.656
Mechanical “Q” (Qms) 11.35
Total Speaker “Q” (Qts) 0.62
Equivalent Compliance (Vas) 0.700 cu ft / 19.82 L
One-Way Linear Excursion (Xmax)* 0.6 in / 15.2 mm
Reference Efficiency (no) 0.23%
Efficiency (1 W / 1 m)** 82.10 dB SPL
Effective Piston Area (Sd) 56.532 sq in / 0.0365 sq m
DC Resistance (Re)*** 9.036 Ω

* Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied.
** For parallel-wired voice coils, divide "Re" by 4. All other specifications remain the same.
*** Re (DC resistance) is measured with the voice coils in series, for parallel-wired specification divide Re by 4. All other specifications remain the same.

Sealed Enclosure Specifications

Table_Image
Wall Thickness 0.75 in / 19 mm
Front Baffle Thickness 0.75 in / 19 mm
Volume (net int.) 0.50 cu ft / 14.16 L
External Width (W) 16 in / 406 mm
External Height (H) 13.875 in / 352 mm
External Depth (D) 6.5 in / 165 mm
F3 40.09 Hz
Fc 50.04 Hz
Qtc 0.96

Enclosure Notes
* The enclosure recommendations listed above are external dimensions which assume the use of 0.75 in (19 mm) thick material. If you are using 0.625 in (16 mm) thick material, subtract 0.25 in (6) from each dimension. Do not use any material with a thickness of less than 0.625 in (16 mm) as this may compromise the rigidity of the enclosure.
* All enclosure volumes listed above are net internal volumes! Driver displacement, port displacement and brace displacement must be added to obtain the final gross internal volume. All enclosure dimensions above have already taken this into account.
* When using multiple subwoofers in a common enclosure you will need to recalculate the enclosure and port dimensions. For assistance please contact your authorized JL Audio dealer or JL Audio Technical Support.
* We recommend the use of this speaker in a bi-amplified system using high-quality satellite speakers and a high-quality amplifier. We do not recommend the use of this subwoofer with a passive crossover (coil), as this type of device will adversely affect performance. 
* All specifications are subject to change without notice.

Safety Notice
Prolonged exposure to sound pressure levels in excess of 100dB can cause permanent hearing loss. This high-performance speaker can exceed this level. Please exercise restraint in its operation in order to preserve your ability to enjoy its fidelity.

When installing a subwoofer in your vehicle, it is extremely important to secure the enclosure firmly. We recommend bolting the enclosure through the metal of the floorpan or the frame of the vehicle with large diameter washers for reinforcement. If an enclosure is not firmly attached, it can become a projectile in a collision. This is particularly important in a hatchback, station wagon, sports utility vehicle, or van.

Ported Enclosure Specifications

Table_Image
Wall Thickness 0.75 in / 19 mm
Front Baffle Thickness 0.75 in / 19 mm
Volume (net int.) 0.60 cu ft / 17 L
External Width (W) 30 in / 762 mm
External Height (H) 14.625 in / 372 mm
External Depth (D) 5.125 in / 130 mm
Internal Slot Port Width (SW) 3.625 in / 92 mm
Internal Slot Port Height (SH) 2.125 in / 54 mm
Internal Slot Port Length (SL) 31.0625 in / 789 mm
Port Extension Length (EL) 26.375 in / 670 mm
Tuning Frequency (Fb) 32.14 Hz
F3 32.11 Hz

Enclosure Notes
* The enclosure recommendations listed above are external dimensions which assume the use of 0.75 in (19 mm) thick material. If you are using 0.625 in (16 mm) thick material, subtract 0.25 in (6.5 mm) from each dimension. Do not use any material with a thickness of less than 0.625 in (16 mm) as this may compromise the rigidity of the enclosure.
* All enclosure volumes listed above are net internal volumes! Driver displacement, port displacement and brace displacement must be added to obtain the final gross internal volume. All enclosure dimensions above have already taken this into account.
* When using multiple subwoofers in a common enclosure you will need to recalculate the enclosure and port dimensions. For assistance please contact your authorized JL Audio dealer or JL Audio Technical Support.
* We recommend the use of this speaker in a bi-amplified system using high-quality satellite speakers and a high-quality amplifier. We do not recommend the use of this subwoofer with a passive crossover (coil), as this type of device will adversely affect performance.
* All specifications are subject to change without notice.

10TW3-D4
close Shopping Cart

Registruotis

Naujo vartotojo registracija

Jau turite paskyrą?
Prisijunkite Arba Atkurti slaptažodį