TAGA Harmony Platinum v.3 B-40 lentyninės kolonėlės
Lentyninės garso kolonėlės.
Titaninis aukštų dažnių bei aliuminis vidutinių-žemų dažnių garsiakalbiai. 15mm storio MDF korpusas.
Nurodyta poros kaina.
Prekėms suteikiama gamintojo numatyta garantija
Nemokamas pristatymas visoje Lietuvoje nuo 50EUR
14 dienų prekių grąžinimo garantija
PLATINUM v.3 series
TLIE-I – The 2nd generation of Taga Low Interference Enclosures is made of high-quality, high-density 15mm thick MDF boards with inside braces (floorstanding models) to increase stiffness and limit any unwanted resonances. The thicker internal bracing and additional transverse strengthening bars (2 in Platinum F-120 v.3, 1 in Platinum F-100 v.3) help to further reduce vibrations.
The shapes are perfectly crafted not only to look wonderful and modern but mainly to lower any unwanted vibrations, diffractions or turbulences, which can affect the sound performance.
All models are equipped with magnetically mountable grills to keep more sleek appearance of speakers’ front panel and new drivers as well as to lower distortions when the grill is taken off.
Carefully selected high quality vinyl finishes are very durable, elegant, imitate natural wood texture and are very pleasant in touch. The vinyl finishes are neatly applied to cabinets using precise machinery to provide the best looks.
CROSSOVERS / INTERNAL WIRING
Internal wiring custom designed and built for the Platinum v.3 series by XLO U.S.A. – one of the best audio cables manufacturer in the World. 14AWG multi-stranded Oxygen Free Copper XLO internal wiring is used for connecting all drivers with crossovers and to ensure that the incoming signal will not lose the most important details on the path from the amplifier to the drivers.
1. T-YOKE / Pole piece
3. Oversized ferrite magnet
4. Top plate
6. TWG-I faceplate - basis
TPTTD-I – the 2nd generation Taga Pure Titanium Tweeter Dome utilizes a new differently shaped and lighter titanium dome as well as an addition of a copper ring on the T-yoke to increase and widen SPL and at the same time lower distortions and to provide faster and more accurate movement of the dome reflecting in more detailed and airy sound.
TWG-I - Taga WaveGuide tweeter faceplate. A specialized horn-like design of the tweeter's faceplate utilizing concave diffusers as well as dome metal grill assists with equal and flat dispersion of sound in and off the axis of the driver. In the newest edition the shape and depth have been redesigned to allow better flow of sound stream and even wider dispersion which helps to build a more three-dimensional and natural soundstage. Minimizing the number of components means better structural rigidity, lower distortions and resonances.
TTP Taga Top Plate (selected models only) reduces standing waves effect and creates three-dimensional performance.
MIDRANGE / MID-WOOFER / WOOFER
1. Additional oversized ferrite magnet [only woofers in F-120 v.3 /F-100 v.3]
2. T-YOKE / Pole piece
4. Top plate
5. Aluminum injection-molded chassis with anti-oxidation surface process
7. Flat wire copper voice coil
8. TPACD-I Taga Pure Aluminum Cone and TRCS rubber surround
9. Pure aluminum dust cap
TPACD-I – the 2nd generation Taga Pure Aluminum Cone Drivers utilize rigid aluminum chassis and provide ultra-fast movement for smooth, rich and very natural midrange frequency response as well as deep, precise and detailed bass performance.
BOM Bassreflex Omnidirectional Module -low-turbulence and high-velocity ports utilizing concave diffusers for increased dispersion of low frequencies.
SPEAKER BINDING POSTS
The high quality, gold-plated banana binding posts are accepting raw speaker cables up to 10AWG and most popular types of connectors.
- Galia, W
- 110W RMS
- Dažnių juosta, Hz
- 38 - 40'000
- Jautrumas, dB
- Varža, ohm
- Svoris, kg
- 7,8kg / vnt
- Dydis (A/P/G), cm
- 41 x 25 x 27.2