Apertura Swing 2-way bookshelf speakers (pair)
Write your review
The Apertura Swing is a premium stand-mount loudspeaker designed to deliver natural tonal balance, precise imaging and remarkable musicality from a compact enclosure. Despite its modest dimensions, it offers controlled bass, a rich midrange and seamlessly integrated treble.
€2,200.00
Tax included
Earn 220 points when you buy me!
worth €66.00!
DRIVE UNITS
- A 16cm mid/woofer with an « isotactic matrix », cone like in Armonia, Edena and their big sisters. This material made of woven polypropylene strips, combines stiffness, lightness and good damping properties.
- The long moving coil allows a long linear excursion. Which is quite amazing for a speaker of this size.
- This drive unit comes also with an original suspension, featuring radial stiffeners that lower the interferences.
- High frequencies are reproduced by a tweeter, member of the famous “Ring Radiator” family.
- In addition to its unusual profile, it has a bullet shape waveguide and a rear damping chamber. The result is an extended frequency response, both at the top end (to above 40kHz), and at the bottom end to allow easier coupling with the bass/mid range drive unit.
CROSSOVER
- High frequencies are reproduced by a tweeter, member of the famous “Ring Radiator” family.
- In addition to its unusual profile, it has a bullet shape waveguide and a rear damping chamber. The result is an extended frequency response, both at the top end (to above 40kHz), and at the bottom end to allow easier coupling with the bass/mid range drive unit.
- Proprietary « DRIM » structure with a triple attenuation slopes
- This technology cancels intermodulation on each sections of the crossover, which result in unsurpassed clarity and resolution
- Same high level component qualities as in Sensa
- Each set of drive units (tweeter and mid/woofer) are individually measured and crossover values adjusted according to these measurements sets.
- Hand wiring on a 140 µm copper printed circuit board.
- Optimized crossover structure to avoid magnetic interference between components
ENCLOSURE
- The main goal, with this new cabinet design, was to limit vibration propagation on the most critical panels (especially on the back panel).
- High thickness panels (18mm)
- Internal dual cavities framework with one bracing panel to stiffen the structure and create very specific areas where damping materials can be applied
- Optimized bass reflex loading allowing reproduction of low frequencies, uncommon for such a size speaker.
- Importance is given to damping treatment to cancel any standing waves. We are using 2 different types of dumping materials
Data sheet
- 48-40 000Hz/ +-3dB
- 87dB/2.83v/1m
- 8ohm
- 7,6kg
- 28 / 19 / 31
| Frequency range | 48 – 40,000 Hz (±3 dB) |
| Sensitivity | 87 dB / 2.83 V / 1 m |
| Impedance | 8 Ω |
| Load | Bass-reflex |
| Drive units | 16 cm mid-woofer "Isotactic Matrix", 25 mm Ring Radiator dome tweeter |
| Crossover frequency | 3.5 kHz |
| Terminals | Bananas |
| Dimensions (W × D × H) | 190 × 310 × 280 mm |
| Weight | 7.6 kg net |






