Emotiva A-300 2 kanalų galios stiprintuvas

Emotiva A-300 2 kanalų galios stiprintuvas

399,00 €
Su mokesčiais

Dviejų kanalų galios stiprintuvas.

Aukšta pagaminimo kokybė bei didelė galia už patrauklią kainą.

Kiekis
Pristatymas pagal užsakymą

  • Prekėms suteikiama gamintojo numatyta garantija Prekėms suteikiama gamintojo numatyta garantija
  • Nemokamas pristatymas visoje Lietuvoje Nemokamas pristatymas visoje Lietuvoje
  • 14 dienų prekių grąžinimo garantija 14 dienų prekių grąžinimo garantija

Circuit Topology

  • The BasX A-300 is a two channel power amplifier. The BasX A-300 combines classical audiophile amplifier architecture, based on a heavy-duty linear power supply, and a carefully designed high current short signal path Class A/B output stage, with advanced microprocessor-controlled monitoring and protection circuitry, to deliver superb sound quality at a truly reasonable price.

Audio Specifications

  • Power Output (both channels driven):
    150 watts RMS per channel; 20 Hz – 20 kHz; THD < 0.1%; into 8 Ohms.
    300 watts RMS per channel; 1 kHz; THD < 1%; into 4 Ohms.

  • Power Bandwidth (at rated power; 8 Ohm load): 20 Hz to 20 kHz (+ / – 0.07 dB)

  • Broad Band Frequency Response: 5 Hz to 80 kHz +0/-1.8 dB

  • THD + noise: < 0.02% (A-weighted); ref rated power

  • Signal to Noise Ratio (8 Ohm load):
    > 120 dB; ref rated power; (A-weighted).
    > 100 dB; ref 1 watt; (A-weighted).

  • Minimum Recommended Load Impedance (per channel): 4 Ohms
    (which equals one 4 Ohm load or two paralleled 8 Ohm loads).

  • Damping Factor (8 Ohm load): > 500.

  • Input Sensitivity (for rated power; 8 Ohm load): 1.2 V.

  • Gain: 29 dB.

  • Input Impedance: 27 kOhms.

Input And Output Connections

  • Input Connections: Unbalanced (RCA); one each per channel.

  • Speaker Output Connections: Audiophile grade 5-way binding posts.

  • Trigger:
    Trigger Input: 5 – 12 V (AC or DC); <10 mA input current required.
    Trigger Output: 12 VDC; can drive any load up to 120 mA.

Power Requirements

  • 115 VAC or 230 VAC @ 50 / 60 Hz (automatically detected).

Front Panel Controls and Indicators

  • Standby: push button (halo ring changes color to indicate Standby or On).

  • Status LEDs: one per channel; blue.
    Status LEDs change to red to indicate a fault condition.

Rear Panel Controls

  • AC Power switch: rocker switch (switches AC main power).

  • Status LEDs switch: disables front panel Status LEDs.

Protection

  • The BasX A-300 is protected against excessive operating temperature, shorted speaker connections, ground faults, and other common fault conditions.

Mechanical

  • Dimensions:
    17” wide x 4” high x 15.5” deep (not including connectors).
    21-1/2” wide x 8” high x 21” deep (boxed).

  • Weight:
    25.2 lbs (unboxed)
    33 lbs (boxed)

Jums taip pat gali patikti

close Shopping Cart

Register

Naujo vartotojo registracija

Jau turite paskyrą?
Prisijunkite Arba Reset password