• -20,00 €

Audio-Technica AT-LP3 plokštelių grotuvas

229,00 € Sutaupote 20,00 €
249,00 €
Su mokesčiais

Pilnai automatinis dirželinis plokštelių grotuvas su keičiama galvute.

  • Specialiai sukurta AT91R galvutė
  • Keičiamas AT-HS3 galvutės laikiklis
  • Subalansuotas tiesus tonarmas
  • Perjungiamas MM / MC režimas
  • 33 / 45 RPM greičiai

Turime ekspozicijoje

Spalva
Kiekis
Pristatymas pagal užsakymą

  • Prekėms suteikiama gamintojo numatyta garantija Prekėms suteikiama gamintojo numatyta garantija
  • Nemokamas pristatymas visoje Lietuvoje Nemokamas pristatymas visoje Lietuvoje
  • 14 dienų prekių grąžinimo garantija 14 dienų prekių grąžinimo garantija

A revolution in automation, the LP3 blends outstanding analogue sound with advanced features unique to a fully-automatic belt-drive turntable. Play 33⅓ & 45 RPM records with a pre-mounted AT91R Dual Moving Magnet phono cartridge whilst the tonearm’s removable universal headshell and switchable cartridge mode allows listeners to experiment with moving magnet and moving coil cartridges. Complete with a built-in phono pre-amplifier, the LP3 represents the next level for vinyl lovers.

  • Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
  • Balanced straight tonearm with hydraulically damped lift control and lockable rest
  • Built-in switchable phono/line pre-amplifier with attached dual RCA output cable
  • Switchable modes for moving magnet and moving coil cartridges
  • AT91R Dual Moving Magnet™ phono cartridge and AT-HS3 universal headshell
  • Anti-resonance, die-cast aluminium platter with 4.5 mm thick rubber mat
  • Damped base construction for reduced low-frequency feedback colouration
Type Fully Automatic, Belt-Drive
Motor DC motor
Speeds 33-1/3 RPM, 45 RPM
Turntable Platter Die-cast aluminium
Wow and Flutter Less than 0.2% WRMS (33 1/3 RPM) at3kHz
Signal-to-Noise Ratio > 60 dB
Output Level “PHONO” (MM) 3.5mV nominal at 1kHz, 5cm/sec 
“LINE” (MC) 220mV nominal at 1kHz, 5cm/sec
Phono Pre-Amp Gain 36dB nominal, RIAA equalised
56dB nominal, RIAA equalised
Power Supply Requirements 220 to 240 V / 50, 60 Hz
Power Consumption 2W
Dimensions 435 mm ×353 mm×128 mm (W×D×H)
Weight 5.2kg
Accessories Included Rubber mat, Dust cover, Platter (with drive belt), Counterweight, AT-HS3 Headshell with AT91R VM stereo cartridge, 45 RPM adapter, Power cable
ATLP3
close Shopping Cart

Register

Naujo vartotojo registracija

Jau turite paskyrą?
Prisijunkite Arba Reset password