PYLON Audio Opal 40 mkII floorstanding speakers (pair)
Designed for deep bass and high-volume playback, the Pylon Audio Opal 40 mkII floorstanding speakers are the top model in the Opal series.
- Three-way design with three woofers and two bass-reflex ports.
- Graphene-reinforced textile dome tweeter and wide-range midrange driver.
- 92 dB sensitivity, 4 ohm impedance and 30 Hz–30 kHz frequency response.
Pylon Audio Opal 40 mkII Floorstanding Speakers
The Opal 40 mkII is the new, top model of the Opal series. A three-way design with three woofers and two bass-reflex ports, engineered for deep bass, high sensitivity and high volume levels.
Key Features
- Three-way design - with three woofers and two bass-reflex ports, engineered for deep bass, high sensitivity and high volume levels.
- 92 dB sensitivity - the Opal 40 mkII plays loud even with a moderately powerful amplifier.
- Three dedicated woofers - supported by the large cabinet volume, low tuning and two bass-reflex ports.
- Wide-range midrange driver - works from midbass to the lower treble, making it easier to tune the whole speaker with phase coherence.
- Graphene-reinforced textile dome tweeter - reaches into the ultrasonic range and extends low for a seamless blend with the midrange.
- Internally stiffened MDF cabinet - with filling to damp interior resonances.
- Magnetic speaker grill - included.
The Opal series grows upwards
The Opal 40 mkII is a new design, created from the ground up, but built on drivers developed for the mkII generation. We set the assumptions at the outset: bass depth, sensitivity and cabinet size depend on one another, so we determined all three values together, and we designed the moving assemblies, magnetic systems, cabinet and its tuning simultaneously, using mathematical modelling tools. In the midwoofer-tweeter-woofer-woofer-woofer configuration, all drivers work on the front baffle. The 92 dB sensitivity means the Opal 40 mkII plays loud even with a moderately powerful amplifier. The crossover binds it all together: air-core coils are key, and a capacitor with the highest-quality dielectrics works in the undamped tweeter path.
Impedance: 4 Ohm. Frequency response: 30 Hz - 30 kHz. Nominal power: 185 W. Max power: 250 W. Dedicated room size: 30 - 55 m².
Three woofers in the bass
We designed the three woofers specifically for this model. Working together, they transfer energy to the air more dynamically and faster than a single driver of the same total area, and they build a tight wavefront. They are supported by the large cabinet volume, low tuning and two bass-reflex ports. The thickened, impregnated cellulose cones work like rigid pistons, and the elongated voice coils on non-conductive formers stay linear at large excursions. The stable fields of strong magnetic systems reduce nonlinear distortion, which you hear in the contours of double bass, bass guitar and synthesizers. The moulded, openwork plastic baskets guide the moving assemblies without air noise or compression.
Woofer: 3 x Pylon Audio PSW 18.12 CP.
Midrange from midbass to the lower treble
The midrange driver works across a wide range, from midbass to the lower treble, which makes it easier to tune the whole speaker with phase coherence. Its light, rigid cellulose cone, air-dried and impregnated with lacquer, is driven by a voice coil on a vented, non-conductive former in a strong magnetic field. Great force applied to low mass yields high cone accelerations, and these carry the texture of instruments, the diction of vocals, and let you tell apart the voices in a choir.
Mid-range: Pylon Audio PSM 18.8 CP.
A tweeter with a large diaphragm
The radiating area of the diaphragm is half as large again as in most competing drivers. The graphene-reinforced textile dome reaches into the ultrasonic range, while the vented rear chamber, vented voice-coil former and recesses under the suspension let it extend low, for a seamless blend with the midrange. The motor is a yoke-type magnetic system with a large neodymium magnet and an ultralight CCAW voice coil, and a Faraday ring reduces distortion. The heatsink, a solution taken from stage drivers, dissipates heat during long, loud playback, so the dynamics do not fade as the voice coil heats up. You hear not only the foreground, but also background details and the acoustics of the recording.
Tweeter: Pylon Audio PST 30.4-TGN.
Cabinet and mounting of the highest order
The tweeter is mounted from the inside, at the mouth of a shallow horn formed directly in the baffle. No faceplate or screws are visible from the outside, and the horn improves time alignment with the midrange and reduces reflections from the cabinet edges. The baskets of the woofers and the midrange driver blend into the lacquered 22 mm front baffle. The slender 18 mm MDF body is stiffened by internal ribbing, interior resonances are damped by filling, and the placement of both follows laser-vibrometer measurements in our anechoic chamber.
Dimensions (W/H/D): 190 / 1100 / 430 mm. Weight: 30 kg / pc. Speaker grill: included, magnetic.
Finishes
Available in 3 distinctive finishes: Black Ash, American Walnut and Natural Oak. PVC veneer.
The Opal 40 mkII brings its dedicated drivers, three-way crossover and internally reinforced cabinet together in a floorstanding speaker designed for deep bass and high-volume playback.
| Sound | |
|---|---|
| Design | Three-way |
| Impedance | 4 Ohm |
| Frequency response | 30 Hz - 30 kHz |
| Nominal power | 185 W |
| Max power | 250 W |
| Efficiency | 92 dB |
| Speakers | |
| Woofer | 3 x Pylon Audio PSW 18.12 CP |
| Mid-range | Pylon Audio PSM 18.8 CP |
| Tweeter | Pylon Audio PST 30.4-TGN |
| Configuration | Midwoofer-tweeter-woofer-woofer-woofer |
| Woofer cones | Thickened, impregnated cellulose |
| Woofer voice coils | Elongated voice coils on non-conductive formers |
| Woofer baskets | Moulded, openwork plastic |
| Midrange cone | Light, rigid cellulose cone, air-dried and impregnated with lacquer |
| Midrange voice coil | Voice coil on a vented, non-conductive former |
| Tweeter diaphragm | Graphene-reinforced textile dome |
| Tweeter motor | Yoke-type magnetic system with a large neodymium magnet |
| Tweeter voice coil | Ultralight CCAW voice coil |
| Tweeter construction | Vented rear chamber, vented voice-coil former, recesses under the suspension, Faraday ring and heatsink |
| Crossover | |
| Coils | Air-core coils |
| Tweeter path | Undamped, with a capacitor |
| Cabinet and mounting | |
| Bass-reflex ports | Two |
| Tweeter mounting | Mounted from the inside, at the mouth of a shallow horn formed directly in the baffle |
| Front baffle | Lacquered 22 mm front baffle |
| Body | 18 mm MDF |
| Cabinet stiffening | Internal ribbing |
| Interior damping | Filling |
| Design | |
| Dimensions (W/H/D) | 190 / 1100 / 430 mm |
| Weight | 30 kg / pc. |
| Dedicated room size | 30 - 55 m² |
| Speaker grill | Included, magnetic |
| Finishes | |
| Black Ash | PVC veneer |
| American Walnut | PVC veneer |
| Natural Oak | PVC veneer |






